چکیده:
بهرغم دستیابی انسان به فناوری استفاده از فلزات در پیشازتاریخ، فناوری تراش دستساختههای سنگی اهمیت و کارایی خود را از دست نداد. در برخی از حوزههای فرهنگی با توجه بهدسترسی محلی به منابع سنگ خام و بهدستآوری آسان و کمهزینه، این فناوری تا هزارۀ اول پیشازمیلاد بهشکلی گسترده ادامه یافته است. پس از عصر سنگ و توسعۀ جوامع پیچیدۀ ساختار تولید دستافزارهای سنگی نیز مطابق بهشرایط از پیچیدگیهای بیشتری برخوردار شد. در این محدوده زمانی تقاضای بیشتر جوامع گسترده و پیچیده در رابطه با استفاده از دستافزارهای سنگی، منجر به شکلگیری نظامهای تخصصی تولید و عرضۀ دستساختههای سنگی شده است. در این پژوهش یکی از نظامهای تولید محصولات سنگی پساپارینهسنگی در جنوبشرق دریای مازندران مورد تحقیق و بررسی قرار گرفته است تا براساس آن تفاوتها و شباهتهای فناوری و گونهشناسی میان پراکندگیهای چالشبرانگیز دستساختههای سنگی دورههای پساپارینهسنگی و پارینهسنگی در محدودۀ جنوب دریای مازندران تبیین گردد؛ اما اینکه این دستساختهها طی چه فرآیندی و با چه زنجیرۀ عملیاتی تولید شدهاند و چه بقایایی خارج از استقرارهای باستانی از مکان خود برجای گذاشتهاند، پرسشی است که این پژوهش در پی پاسخگویی به آن است. پنج پایگاه تولید دستافزارهای سنگی در منطقهای به وسعت چهار کیلومتر مربع شناسایی و مورد بررسی باستانشناختی قرار گرفت. پنجبرار بزرگترین مکان تولید دستافزار سنگی شناسایی شده در منطقه است. در این پژوهش، 796 قطعه دستساخته سنگی بهدست آمده از محوطۀ پنجبرار رستمکلا مورد مطالعۀ فناوری و گونهشناسی قرار گرفته است. مهمترین محصول این محوطه، تیغههای سنگی بلند است. در نتیجه، محوطههای شناسایی شده بهعنوان بخشی از یک نظام گستردۀ تولید دستافزار سنگی با محوریت گوهرتپه قلمداد شدهاند. همچنین با تحلیل توالی تراش از مراحل مقدماتی تا تولید تیغه چگونگی بهوجود آمدن تراشههای شبه لوالوا مورد بحث قرار گرفته است.
In the earliest times stone tools were produced for the vital needs of hunting or gathering food resources for which the awareness of humans on the characteristics of different kinds and mineral capacities of stones raw materials played an important role in the production processes. Stone tools were produced, traded and used according to the different environmental Potential to different tradition from the lower Palaeolithic to the later times even human access to metal technology in the later pre-historic period, lithic technology did not lose its importance and efficiency. With the advent of urbanization and the development of complex societies, the structure of stone tools production systems has become more complex. In some areas, due to the local or regional availability of low-cost raw materials, the lithic technology has continued to expand widely even to the first millennium BC. At this time, the high demand in complex societies for the use of stone tools has led to the development of specialized lithic production systems. In the area of this study, a post-Palaeolithic stone tool production system in the south-east of the Caspian Sea has been investigated. This system deals with the massive settlement urbanization of Gohar Tepe to produce and supply lithic products at the regional level. In this study, 5 sites, namely Khanehsar 3, Rostamkola 1, Panj Berar, Bez khal, Kefal Lingeh, present surface dispersions of lithic material. The common characteristic of all lithic production bases is existence of large blades cores and long blades. Due to a high density of lithic scattered on an extensive area of about 10 ha, the Panj Berar area was selected for sampling of lithic artifacts. Flakes with centripetal negative removal, hereinafter referred to as Levallois-like flakes, by-products are a production process that can be misleading. This research examines how to create these flakes.