چکیده:
امروزه آلودگیهای زیست محیطی ناشی از پسماندها درشهرکهای صنعتی، توجه منابع علمی و اجرایی جهان رابه دفع و بازیافت صحیح این مواد جلب کرده است. شناخت وضعیت موجود پسماندهای صنعتی میتواند نقش کلیدی در جهت اعمال مدیریت صحیح پسماندهای صنعتی داشته باشد. هدف از مطالعه حاضر شناسایی نوع و میزان و نحوه مدیریت پسماندهای تولیدی برخی از واحدهای صنعتی فعال در استان البرز میباشد. به منظور بررسی وضعیت مدیریت پسماندهای صنعتی پرسشنامهای طراحی و بر اساس کار میدانی، پرسشنامه از طریق برخی از واحدهای صنعتی تکمیل گردید. در مرحله بعد بر اساس اطل عات پرسشنامه، از واحدهای تولیدی صنعتی که بیشترین میزان تولید پسماند را در سطح استان دارد شامل) پسماندهای صنایع غذایی، صنایع سلولزی و واحدهای فلزی و کانی غیر فلزی (می باشند. بر اساس ضوابط و روشهای مصوب، نمونه برداری از انواع پسماندها انجام شد ودر محیط آزمایشگاه آنالیز و موردتجزیه وتحلیل قرار گرفت. با توجه به نتایج حاصله، کلیه پارامترهای مورد نظر در نمونه لجن تصفیه خانه فاضلب سیستم تصفیه خانهها صنایع غذایی کمتر از میزان استاندارد ملک عمل میباشدوجز پسماندهای عادی محسوب میشوند نتایج آنالیز سایر نمونه پسماندها گروههای مختلف نشان داد، میزان پارامترهای آنتیموان، کروم، روی و سرب درنمونه پسماند واحدهای ریخته گری، پارامترهای کروم، سرب، نقره و آرسنیک درنمونه پسماند واحد فلزی و پارامتر کروم در گروه صنایع سلولزی بالتر از حداستاندارد بوده است. لذا به دلیل میزان عنصر سنگین بیش از حد استاندارد منابع پذیرنده که خاصیت سمی درمنبع پذیرنده ایجاد میکند جز پسماند ویژه محسوب و برای مدیریت آن نیازمند روشهای بیخطر سازی قبل از دفع میباشد.
Today, the environmental pollution caused by waste in industrial cities has drawn the attention of the world's scientific and executive resources to the proper disposal and recycling of these materials. Knowing the current situation of industrial waste can play a key role in the proper management of industrial waste. The purpose of the present study is to identify the type, amount and method of managing production wastes of some active industrial units in Alborz province. In order to check the status of industrial waste management, a questionnaire was designed and based on fieldwork, the questionnaire was completed through some industrial units. In the next step, based on the information of the questionnaire, among the industrial production units that have the highest amount of waste production in the province include (food industry waste, cellulose industry, and metal and non-metal mineral units). All types of wastes were analyzed and analyzed in the laboratory environment According to the results, all the desired parameters in the sewage treatment plant sludge sample of the food industry treatment plant system are less than the standard level of action criteria, except for normal waste, The results of the analysis of other waste samples of different groups showed that the amount of antimony, chromium, zinc and lead parameters in the waste sample of casting units, the parameters of chromium, lead, silver and arsenic in the waste sample of the metal unit and the chromium parameter in the cellulose industry group were above the standard limit. Therefore, due to the amount of heavy element exceeding the standard of receiving sources, which creates toxic properties in the receiving source, it is considered as special waste, and for its management, decontamination methods are required before disposal.